Centea, T., Lo, J., Anders, M., Nutt, S. R. (2014). Process Modeling for Resin Transfer Molding of a Modified Heterocyclic Phenolic/Epoxy Blended Resin. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Wu, M.-S., Centea, T., Nutt, S. R. (2014). Process Optimization for Compression Molding of Reused Prepreg Scrap. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Ashrafi, B., Martinez-rubi, Y., Jakubinek, M. B., Kim, K. S., Hrdina, A., Kingston, C. T., Yousefpour, A., Johnston, A., Simard, B. (2014). Processing and Properties of Epoxy-Impregnated Boron Nitride Nanotube Buckypaper. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Sitte, V., Poillucci, R. A., Hansen, C. J. (2014). Processing of Degradable Polymer Fibers for Microvascular Pathways. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Pankow, M. (2014). Projectile Impact on Kevlar Fabric Including Scaling Effects. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Banerjee, S., Patra, S., Chijioke, A. (2014). Quantification of Memory Effect in Composites under Fatigue for Precursor Damage Analysis. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Clay, S., Holzwarth, R. (2014). Quantitative Assessment of Progressive Damage Tools for Composites. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Hart, K. R., Wetzel, E. D., Sottos, N. R., White, S. R. (2014). Repeatable Self-Healing of an Epoxy Matrix Using Latent 2-Ethyl-4-Methylimidazole Catalyst. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Aydil, T., Tanabi, H., Erdal, M. (2014). Resin Transfer Molding of Particle-Filled, Continuous-Fiber Reinforced Composites. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Kier, Z. T., Patel, D. N., Goyal, V. K., Rome, J. I., Steckel, G. L., Waas, A. M. (2014). Response of 3D Fiber Reinforced Foam Core Sandwich Structures at Cold Temperatures. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Avachat, S., Zhou, M. (2014). Response of Carbon-Fiber/PVC Foam Composite Structures Subjected to Oblique Underwater Impulsive Loads. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Hafeez, F., Almaskari, F. (2014). Scaling Effects in Glass Reinforced Epoxy Filament Wound Tubes Subjected to Quasi Static Indentation. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Carlsson, L. A., Fichera, M. (2014). Seawater Absorption in Unidirectional Carbon/Vinylester. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Ku-herrera, J. D. J., Aviles, F., May-pat, A., Saponara, V. L., Castro, R. H. R. D., Pinto, B. (2014). Selective Damage Sensing in Glass Fiber/Carbon Nanotubes/Vinyl Ester Smart Composites by Means of Electrical Resistance. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Kim, S. Y., Sottos, N. R., White, S. R. (2014). Self-healing of Transverse Cracks in Cross-Ply Composites Using a Microencapsulated Solvent-Based Healing System. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Naito, K. (2014). Shear Properties of Carbon Fiber/Epoxy Composite. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Malek, P., Walczyk, D. (2014). Silicone Rubber Properties During Advanced Composites Consolidation/Curing Using Specialized Elastomeric Tooling (SET). In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Deobald, L., Park, C. Y., Desai, N., Ramnath, M., Jin, O., Lukaszewicz, D., Kerscher, S. (2014). Simulation of Composite Manufacturing Variations to Determine Stiffness and Strength Reductions in Automotive and Aerospace Structure. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Breitzman, T. D., Mollenhauer, D. H., Iarve, E. V., Zhou, E. G., Hoos, K. H. (2014). Simulation of Micro-Scale Mode-I Fracture in a Composite Lamina. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Siriruk, A., Woracek, R., Puplampu, S. B., Penumadu, D., Withers, P. J., Lowe, T., Kardjilov, N., Manke, I., Hilger, A. (2014). Size Effects in Testing of Carbon Fiber Vinyl Ester Laminate for Marine Application and Damage Evolution. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Todoroki, A., Suzuki, Y., Ozawa, T. (2014). Stacking Sequence Optimization of Stiffened Composite Plate with Constraints of Residual Deformation and Buckling. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Davidson, B. D. (2014). Standardization of the End-Notched Flexure Test for Mode II Delamination Toughness Determination of Unidirectional Laminated Composites. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Nilakantan, G., Nutt, S. R. (2014). State of the Art in the Deterministic and Probabilistic Ballistic Impact Modeling of Soft Body Armor: Filaments to Fabrics. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Nakada, M., Okuya, T., Miyano, Y. (2014). Statistical Prediction of Tensile Creep Failure Time for Unidirectional CFRP. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Wu, A. S., Urabe, D., Hepa, V., Elmer, W., King, M. J. (2014). Strain Rate Strengthening and Failure Behavior of Filament Wound Composites. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Cole, B. W., Li, L., Wang, S. S. (2014). Strength and Failure Modes of Thick-Adhesive Bonded Joints of Glass Fabric/Vinyl Ester Composite Laminates. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Rahman, N. M., Qian, H., Sun, C. T. (2014). Strength Prediction of Single Lap Joint Using CTOA. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Zhupanska, O. I. (2014). Stress Analysis in the Vicinity of the Impact Zone in the Transversely Isotropic Composite: An Exact Analytical Solution to the 3D Problem. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Tippmann, J. D., Scalea, F. L. D. (2014). Structural Health Monitoring of Composite Wind Turbine Blades Using Diffuse Ultrasonic Fields and Reciprocity. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Lo, K. H., Yu, T. P., Wang, S. S. (2014). Structural Integrity of Large Composite Offshore Wind Turbine Rotor Blades. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Chou, C.-C., Sun, P.-F., Chen, Y.-C. (2014). Structural Testing of Dual-Core Self-Centering Braces with FRP Bars and FRP Wide-Flange Beams. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Ranatunga, V., Clay, S. (2014). Study of Delamination Onset under Mode-II Loading in Translaminar Reinforced Composites Using Acoustic Emission Techniques. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Chowdhury, S. C., Haque, B. Z. (., Gillespie, J. W., Jr. (2014). Study of the Interaction of Silica Glass Surface with Water and Silane Coupling Agent. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Hira, H., Itoh, H., Yamada, K., Suzuki, T. (2014). Study on the Laser Beam Cutting of Carbon Preform by Several Laser Equipment of Various Properties. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Gabr, M. H., Uzawa, K., Kimpara, I. (2014). Study the Effect of Nano-Clay Filled Carbon Fibre/Polypropylene Composite on Mechanical Properties. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Sato, Y., Hayashi, K., Arita, K. (2014). Synthesis and Properties of Multi-Functional Epoxy Resins Containing Naphthalene Units. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Ferdous, S. F., Adnan, A. (2014). Tailoring Fracture Toughness of Silicon Carbide Ceramics Film via Nanoscale Multi-Layering with Diamond. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Tuwair, H., Volz, J., Elgwady, M., Mohamed, M. (2014). Testing and Evaluation of GFRP Sandwich Bridge Deck Panels Filled with Polyurethane Foam. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Ii, K. R. H., Siddique, Z., Altan, M. C. (2014). The Coupled Effect of Microvoids and Hydraulic Fluid Absorption on Mechanical Properties of Quartz/BMI Laminates. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Kanaya, T., Toshima, H., Goto, K., Otani, A., Yoneyama, S., Arikawa, S. (2014). The Creation of Super Lightweight CFRP Ablator and Evaluation of Its Thermal and Mechanical Properties. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Littell, J. D. (2014). The Development of a Conical Composite Energy Absorber for Use in the Attenuation of Crash/Impact Loads. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Ryan, T. J., Kelkar, A. D., Kimbro, E. (2014). The Effect of Curing Temperature on the Fracture Toughness of Fiberglass Epoxy Composites. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Reeder, J. R. (2014). The Inclusion of Arbitrary Load Histories in the Strength Decay Model for Stress Rupture. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Bidaine, B., Adam, L., Gerard, J.-S., Malo, T., Assaker, R. (2014). The Multi-Scale Modeling of Fatigue and Failure of Continuous Fiber Composites. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Law, X. M., Brewer, A., Pettit, J. M., Joven, R., Moore, J. C. (2014). Thermal Resistant Polymers for Microelectronic Applications. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Nomura, S. (2014). Thermal Stresses in Composites Induced by Heat Flow. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Johnston, A. L., Czabaj, M. W., Davidson, B. D., Ratcliffe, J. G. (2014). Three-Dimensional Crack Surface Evolution in Mode III Delamination Toughness Tests. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Czabaj, M. W., Riccio, M. L., Whitacre, W. W. (2014). Three-dimensional Imaging and Numerical Reconstruction of Graphite/Epoxy Composite Microstructure Based on Ultra-High Resolution X-Ray Computed Tomography. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Ganesh, R., Sockalingam, S., Misumi, J., Abu-obaid, A., Gillespie, J. W., Jr. (2014). Three-Dimensional Modeling of Unidirectional Composites with Fiber Fracture: Role of Matrix Properties. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.

Chou, H. Z., Yang, H., Hsu, C.-C., Wei, B.-J., Yao, Y., Chang, R.-Y. (2014). Through 3D Numerical Simulation and Experimental Visualization to Study the Resin Transfer Molding. In: Proceedings of the 29th ASC Technical Conference. La Jolla, CA.