Nadabe, T., Nishikawa, M., Siivola, J., Takeda, N. (2010). A Damage Model for the Simulation of Bearing Failure in Bolted Joints of Interlaminar Toughened CFRP Laminates. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Mittelstedt, C. (2010). A Four-Decade View on the Pipes-Pagano Problem: Free-Edge Effects in Composite Laminates. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Barroeta-robles, J., Cole, R., Sands, J. M., Parker, T. (2010). A Novel Approach to Generation of Adhesive Bonds with Controlled Bond Strength. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Hallett, S. R., Harper, P. W. (2010). A Numerical Fatigue Model for Application to Tidal Turbines. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Davidson, B. D., Sediles, F. O., Humphreys, K. D. (2010). A Shear-Torsion-Bending Test for Mixed-Mode I-II-III Delamination Toughness Determination. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Kobayashi, Y., Lagace, P. A., Jeffrey, H. K. (2010). A Test Specimen for Composite Laminates with Grooves Subjected to Out-of-Plane Contact Loading. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Rios, G., Chan, W. S. (2010). A Unified Analysis of Stiffener Reinforced Composite Beams. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Giannis, S., Hansen, K., Martin, R. H. (2010). Accounting for the R-Curve Effects on the Mode I Fatigue Delamination Growth Characterisation of Unidirectional Composites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Maleki, M. H., Qatu, M. S. (2010). Accurate Modeling and Vibrations Studies of Laminated Composite Beams. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Song, M. C., Sankar, B. V., Subhash, G., Yen, C. F. (2010). An Analytical Non-Dimensional Model for Mode I Delamination of Z-Pinned Composites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Meyer, P., Waas, A. M., Kruse, F., Gries, T. (2010). An Experimental Study of the Effect of Stitching on Low-Velocity-Impact (LVI) Damage and Compression-After-Impact (CAI) Strength. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Zand, B., Doudican, B. M., Butalia, T. S., Wolfe, W. E. (2010). An Improved Strain-Energy Based Failure Theory for Composite Laminates. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Zhou, Y., Hosur, M., Jeelani, S., Cheng, Z.-Y. (2010). Atom Scale Simulation of the Electrical Resistance of a Single-Walled Carbon Nanotube. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Sollenberger, S. G., Bail, J. L., Kohlman, L., Ruggeri, C. R., Bakis, C. E., Roberts, G. D., Smith, E. C. (2010). Ballistic Impact Tolerance of Filament-Wound Composite Tubes with Rigid and Flexible Matrix Materials. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Kondo, A., Sato, Y., Suemasu, H., Aoki, Y. (2010). Bifurcation Behavior of Delamination Cracks in Composite Laminates Under General Shear Mode Crack Propagation Condition. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Tubbs, T., Palazotto, A., Willis, M. (2010). Bio-Inspired Research for Manufacturing Purposes. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Murayama, H., Kageyama, K., Uzawa, K., Ohara, K., Ohsawa, I., Kanai, M., Igawa, H. (2010). Birefringence Effect of Embedded FBGs Due to Peel Stress at the Overlap End of Single-Lap Joint. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Lebel, L. L., Daisuke, H., Yoshitaka, T., Nakai, A. (2010). Braid-Trusion of Jute/Polylactic Acid Composites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Rhaman, R., Haque, A. (2010). Characterizing Interfacial Properties and Elastic Constants Using Molecular Dyamics Simulation of Cross-Linked Graphene-Epoxy Nanocomposites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Luo, S., Wang, B., Liu, T. (2010). Combined Microfluidization and Ultrasonication Process for High Throughput and Large-Scale Production of SWCNT Dispersions. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Haynes, R. A., Apte, A. P., Wang, B. P., Armanios, E. A. (2010). Comparison of Optimal Hygrothermally Stable Laminates with Extension-Twist Coupling Using Sequential Quadratic Programming and Ant Colony Optimization. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Baucom, J. N., Pogue, W. R., Iii, Pham, G. T., Thomas, J. P. (2010). Composite Tiling for Impact Damage Tolerance. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Pankow, M., Waas, A. M., Yen, C.-F., Ghiorse, S. (2010). Compression Response of 3DWoven Composites Subjected to High Loading Rates. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Ueda, M., Nishimura, T. (2010). Compressive Failure of Unidirectional CFRP Plate Under Progressive Crushing. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Siriruk, A., Penumadu, D. (2010). Coupled Effect of Sea Water and Low Temperature on Polymeric Composites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Kosaka, T., Osaka, K., Sawada, Y. (2010). Cure Monitoring of Nano-Carbon Dispersed Polymers by Fiber Optic Sensors. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Nakatani, H., Kosaka, T., Osaka, K., Sawada, Y. (2010). Damage Characterization of Ti/GFRP Laminates Subjected to Low-Velocity Impact. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Kumazawa, H., Takatoya, T. (2010). Damage Development and Gas Leakage in CFRP Angle-Ply Laminates Under Biaxial Loadings. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Silva, M. L., Ravichandran, G. (2010). Damage Growth Determination via Evolving Stress Fields in Composite Materials. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Nishikawa, M., Nadabe, T., Takeda, N. (2010). Damage Modeling of Bearing Failure in CFRP Bolted Joints Based on Fiber Compressive Failure Criterion Under Multiaxial Stress States. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Yudhanto, A., Watanabe, N., Iwahori, Y., Hoshi, H. (2010). Damage Progression in Stitched Composites Containing Circular Hole Under Fatigue Loads. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Gao, L., Chou, T.-W., Thostenson, E. T., Zhang, Z. (2010). Damage Sensing in Fiber Composites Using Uniformly and Non-Uniformly Dispersed Carbon Nanotubes. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Gao, L., Chou, T.-W., Thostenson, E. T. (2010). Damage Sensing of a Highly Conductive Carbon Nanotube-Polymer Composite Under Cyclic and Impact Loading. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Owens, B. C., Whitcomb, J., Varghese, J. (2010). Decoupled Subdomain Strategy for Prediction of Through-Thickness Oxidation of Woven Composites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Okabe, Y., Fujibayashi, K., Shimazaki, M., Soejima, H. (2010). Delamination Detection in CFRP Laminates Using a Built-In Broadband Lamb Wave Propagation System. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Nguyen, N. Q., Muriuki, M., Pochiraju, K. (2010). Design and Analysis of Nano-Composite Termites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Krueger, R. (2010). Development of a Benchmark Example for Delamination Fatigue Growth Prediction. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Vogl, G. A., Hyer, M. W. (2010). Dynamics of Bistable Unsymmetric Fiber-Reinforced Composite Laminates. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Mohiuddin, M., Hoa, S. V. (2010). Effect of Compression on Electrical Conductivity of CNT-PMMA Composites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Ogi, K., Yashiro, S., Yoshimura, A. (2010). Effect of Impact Speed on High-Speed Impact Damage in CFRP Unidirectional and Cross-Ply Laminates. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Todoroki, A., Samejima, Y., Matsuzaki, R., Mizutani, Y. (2010). Effect of Indentation on Electrical Resistance Change of CFRP. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Uddin, M. F., Sun, C. T. (2010). Effect of Particle Size on the Strength of Nanocomposites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Tcherbi-narteh, A., Hosur, M. V., Jeelani, S. (2010). Effect of UV Radiation on Mechanical and Thermal Properties of Carbon Fiber Reinforced Polymer Composites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Hossain, M. K., Hossain, M. E., Hosur, M., Jeelani, S. (2010). Effects of CNF on Compression and Thermal Responses of E-Glass/Polyester Nanocomposite. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Zhu, Y., Bakis, C. E. (2010). Effects of Functionalized Carbon Nanotubes on Mode I and Ode II Interlaminar Fracture Toughness of a Hybrid Glass Fiber/MWCNT/Epoxy Composite. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Kobayashi, S., Kawahara, M. (2010). Effects of Ply Thickness on the Residual Burst Strength of Hoop-Wrapped CFRP Composite Vessels After Out-of-Plane Loading. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Davidson, B. D., Singh, A. K. (2010). Effects of Subzero Temperatures, Seawater Immersion and Low Velocity Impact on Flexural Strength, Stiffness and Life of Sandwich Composites. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Tagliavia, G., Porfiri, M., Gupta, N. (2010). Elastic Interaction of Interfacial Spherical-Cap Cracks in Syntactic Foams. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Miao, Y., Yu, J., Wang, Y., Yen, C.-F., Swenson, D., Cheeseman, B. A. (2010). Energy Loss Due to Transverse Plastic Deformation of Fibers in Textile Fabric Impact Processes. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.

Schubel, P. M., Tuck-lee, J., Goyal, V. K., Rome, J. I., Steckel, G., Patel, D. (2010). Evaluation of Composite Sandwich Structures Containing Core Thickness Mismatches. In: Proceedings of the 25th ASC Technical Conference (14th US-Japan Conference). Dayton, OH.