R. A. Florentine. "3-D Braided Preform Fabrication Cost to Manufacture (CTM): (III) Inputs to the MAGNAWEAVE Model." In 7th ASC Technical Conference, University Park, PA, 1992.

R. Pandey, H. T. Hahn. "A Micromechanics Model for 2D Fabrics." In 7th ASC Technical Conference, University Park, PA, 1992.

C. T. Sun, C. Warren. "A New Analytical Model for Predicting Cooling Tooling Molding Temperature." In 7th ASC Technical Conference, University Park, PA, 1992.

S. R. White, C. Kim. "A Simultaneous Lay-Up and In Situ Cure Process for Thick Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

Y. Wang, S. Du, D. Zhao, A. Ramasamy. "A Study of Composites from Weaving, Braiding, and Pultrusion Processes." In 7th ASC Technical Conference, University Park, PA, 1992.

W. Chinsirikul, T. C. Chung, I. R. Harrison. "Adhesion Improvement in Polypropylene/Aluminum Laminates." In 7th ASC Technical Conference, University Park, PA, 1992.

J. L. Rose, A. Pilarski, J. J. Ditri. "An Approach to Guided Wave Mode Selection for Inspection of Laminated Plate." In 7th ASC Technical Conference, University Park, PA, 1992.

C. Wang, C. T. Sun. "Behavior of Thermoplastic Composite during Cooling from Molding Temperature." In 7th ASC Technical Conference, University Park, PA, 1992.

J. Z. Wang, D. F. Socie. "Biaxial Testing of G-10 Tubular Specimens with an In-Plane Shear Stress." In 7th ASC Technical Conference, University Park, PA, 1992.

R. Gavara, R. J. Hernandez. "Bimodal Diffusion Process in the Oxygen Mass Transport through Nylon 6 at Different Temperature and Water Activity Conditions." In 7th ASC Technical Conference, University Park, PA, 1992.

D. Zhang. "Carbon Fibers from Oriented Polyethylene Precursors." In 7th ASC Technical Conference, University Park, PA, 1992.

S. Canumalla, R. N. Pangborn, J. C. C. Jr., R. B. Bhagat, B. R. Tittmann, S. A. Dynan, D. J. Green. "Characterization of Cast, Discontinuous Alumina-Silicate Fiber-Reinforced Aluminum Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

R. K. Goldberg, D. A. Hopkins. "Composite Micromechanical Modeling Using the Boundary Element Method." In 7th ASC Technical Conference, University Park, PA, 1992.

C. A. Lewinsohn, C. E. Bakis, H. T. Hahn, R. E. Tressler. "Creep Testing of CVD Silicon Carbide Fibers." In 7th ASC Technical Conference, University Park, PA, 1992.

F. Abrams, M. Ungarish. "Effect of Pressure on Phenolic Cure." In 7th ASC Technical Conference, University Park, PA, 1992.

M. V. Bruschke, T. L. Luce, S. G. Advani. "Effective In-Plane Permeability of Multi-Layered RTM Preforms." In 7th ASC Technical Conference, University Park, PA, 1992.

J. N. Rossettos, M. Olia. "Effects of Matrix Yielding in a Hybrid Composite Monolayer." In 7th ASC Technical Conference, University Park, PA, 1992.

S. R. White, Y. K. Kim. "Effects of Staged Curing on Mechanical Properties of Thermosetting Matrix Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

V. Gupta, K. Anand, M. Kryska. "Failure Mechanisms of 2D Laminated Carbon-Carbon Composites under Uniaxial Compression." In 7th ASC Technical Conference, University Park, PA, 1992.

R. Y. Kim. "Failure of Unidirectional and Cross-Ply SiC/Glass-Ceramic Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

P. Newnham, S. Abrate. "Finite Element Analysis of Heat Transfer in Anisotropic Solids: Application to Manufacturing Problems." In 7th ASC Technical Conference, University Park, PA, 1992.

F. R. Phelan, Jr.. "Flow Simulation of the Resin Transfer Molding Process." In 7th ASC Technical Conference, University Park, PA, 1992.

B. K. Larson, L. T. Drzal. "Interphase Development in a Liquid Composite Molding Environment." In 7th ASC Technical Conference, University Park, PA, 1992.

S. K. Datta, T.-H. Ju. "Inversion of Material and Defect Characteristics Using Guided Waves." In 7th ASC Technical Conference, University Park, PA, 1992.

R. H. Martin, E. J. Siochi, T. S. Gates. "Isothermal Aging of IM7/8320 and IM7/5260." In 7th ASC Technical Conference, University Park, PA, 1992.

K. C. M. Jr., R. B. Bhagat, R. P. Martukanitz. "Laser Processing of Discontinuously Reinforced Aluminum Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

P. Mehrkam, R. Cochran. "Liquid Dicyanate Ester Monomer Resin for Elevated Temperature Composite Repair Applications." In 7th ASC Technical Conference, University Park, PA, 1992.

P. Karpur, T. Matikas, S. Krishnamurthy. "Matrix-Fiber Interface Characterization in Metal Matrix Composites Using Ultrasonic Imaging of Fiber Fragmentation." In 7th ASC Technical Conference, University Park, PA, 1992.

M. R. Nedele, M. R. Wisnom. "Micromechanical Modelling of a Unidirectional Carbon Fibre-Epoxy Subjected to Mechanical and Thermal Loading." In 7th ASC Technical Conference, University Park, PA, 1992.

E. E. Carapella, M. W. Hyer, O. H. Griffin, Jr.. "Micromechanics of Noncircular Fibers." In 7th ASC Technical Conference, University Park, PA, 1992.

X. Tang, P. R. Howell. "Microstructural Development of a Spray Formed Aluminum Lithium/SiC Composite during Aging. A Preliminary Report." In 7th ASC Technical Conference, University Park, PA, 1992.

G. P. Tandon, N. J. Pagano. "Modeling of Interfacial Debonding in Brittle Matrix Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

R. B. Pipes, C. M. ST. Creasy, S. T. Shuler, J. Simacek. "More on the Rheological Behavior of Collimated Fiber Thermoplastic Composite Materials." In 7th ASC Technical Conference, University Park, PA, 1992.

P. Pluvinage, A. Parvizi-majidi, T. W. Chou. "Morphological and Mechanical Characterization of 2D Woven and 3D Braided SiC/SiC Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

A. S. Crasto, R. Y. Kim. "On the Determination of Residual Stresses in Fiber-Reinforced Thermoset Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

L. C. Davis, J. Chen, M. F. Thorpe. "Predicting the Elastic Properties of Composite Materials." In 7th ASC Technical Conference, University Park, PA, 1992.

J. L. D. Runkle. "Progressive Transverse Cracking and Local Delamination in Composite Laminates." In 7th ASC Technical Conference, University Park, PA, 1992.

K. Anand, V. Gupta, D. Dartford. "Shear Fracture of Laminated Carbon-Carbon Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

Y. A. Dzenis. "Software and Database D-COMP for Composite Properties Calculation." In 7th ASC Technical Conference, University Park, PA, 1992.

M. R. Wisnom. "The Effect of Interlayers on the Transverse Tensile Stress-Strain Behaviour of Unidirectional Silicon Carbide/6061 Aluminium." In 7th ASC Technical Conference, University Park, PA, 1992.

S. R. White, Z. Zhang. "The Effect of Mandrel Material on the Processing-Induced Residual Stresses in Thick Filament Wound Composite Cylinders." In 7th ASC Technical Conference, University Park, PA, 1992.

K. L. Clotfelter, D. H. Morris. "The Effect of Thickness on the Fracture Behavior of Graphite/Bismaleimide Laminates with Central Circular Holes." In 7th ASC Technical Conference, University Park, PA, 1992.

C. P. Hoppel. "The Effects of Tension-Tension Fatigue on the Mechanical Behavior of Short Fiber Reinforced Thermoplastics." In 7th ASC Technical Conference, University Park, PA, 1992.

S. J. Claus. "The Effects of Winding Pattern on the Compressive Behavior of Filament-Wound Cylinders." In 7th ASC Technical Conference, University Park, PA, 1992.

S. L. Gunderson, J. A. Lute. "The Use of Preformed Holes for Increased Strength and Damage Tolerance of Advanced Composites." In 7th ASC Technical Conference, University Park, PA, 1992.

S. T. Holmes, J. W. Gillespie, Jr.. "Thermal Analysis for Resistance Welding of Large-Scale Thermoplastic Composite Joints." In 7th ASC Technical Conference, University Park, PA, 1992.

J. M. Whitney, I. U. Haq, S. R. Soni. "Thermo-Stress Analysis of a Plated-through-Hole in a Composite Printed Wiring Board." In 7th ASC Technical Conference, University Park, PA, 1992.

A. K. Mal, S.-S. Lin, Y. Bar-cohen. "Ultrasonic Characterization of Interlaminar Interfaces of Composite Laminates." In 7th ASC Technical Conference, University Park, PA, 1992.

C. L. Yen, B. R. Tittmann. "Ultrasonic Characterization of Macroporosity." In 7th ASC Technical Conference, University Park, PA, 1992.