A Model for the Prediction of Ply Stresses in a Composite Laminate During Forming
T. G. Gutowski, A. S. Tam
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Gutowski, T. G., Tam, A. S. (1988). A Model for the Prediction of Ply Stresses in a Composite Laminate During Forming. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
A Procedure for Accurate Determination of Elastic Properties for Unidirectional Composite Materials
J. M. Starbuck, Z. Gurdal
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Starbuck, J. M., Gurdal, Z. (1988). A Procedure for Accurate Determination of Elastic Properties for Unidirectional Composite Materials. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
An Approach for Predicting the Crippling Strength of Thin-Walled Composite Airframe Structures Under Compression
L. W. Rehfield, K. L. Parnas
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Rehfield, L. W., Parnas, K. L. (1988). An Approach for Predicting the Crippling Strength of Thin-Walled Composite Airframe Structures Under Compression. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
An Improved Procedure for Free Edge Stress Analysis In Composite Laminates
S. R. Soni, D. K. Chu
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Soni, S. R., Chu, D. K. (1988). An Improved Procedure for Free Edge Stress Analysis In Composite Laminates. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Analysis of Interference Fit Pins in Composite Plates
T. S. Ramamurthy
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Ramamurthy, T. S. (1988). Analysis of Interference Fit Pins in Composite Plates. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Analysis of Notched Free-Edge Delamination Specimen
W. T. Sison
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Sison, W. T. (1988). Analysis of Notched Free-Edge Delamination Specimen. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Analysis of the End Notch Flexure Specimen Using a Higher Order Beam Theory Based on Reissner's Principle
J. M. Whitney
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Whitney, J. M. (1988). Analysis of the End Notch Flexure Specimen Using a Higher Order Beam Theory Based on Reissner's Principle. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Application of Sliding Mode Control to the Cure of a Thermoset Composite
A. S. Tam, T. G. Gutowski
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Tam, A. S., Gutowski, T. G. (1988). Application of Sliding Mode Control to the Cure of a Thermoset Composite. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Bismaleimide: A Historical Perspective
M. E. Carrega, R.-P. Chimie
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Carrega, M. E., Chimie, R.-P. (1988). Bismaleimide: A Historical Perspective. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Composite Materials in Orthopaedic Applications
R. D. Jamison
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Jamison, R. D. (1988). Composite Materials in Orthopaedic Applications. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Continuous Silicon Carbide Fiber Reinforced Metal Matrix Composites
M. A. Mittnick
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Mittnick, M. A. (1988). Continuous Silicon Carbide Fiber Reinforced Metal Matrix Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Correction Factors for Finite-Width Anisotropic Plates Containing Elliptical Openings
S. C. Tan
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Tan, S. C. (1988). Correction Factors for Finite-Width Anisotropic Plates Containing Elliptical Openings. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Cosserat Micromechanics of Structured Media Experimental Methods
R. Lakes
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Lakes, R. (1988). Cosserat Micromechanics of Structured Media Experimental Methods. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Creep and Creep-Recovery of a Thermoplastic Resin and Composite
C. Hiel
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Hiel, C. (1988). Creep and Creep-Recovery of a Thermoplastic Resin and Composite. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Dependence of Incipient Edge Delamination Strength on Neat Resin Fracture Toughness
A. R. Wedgewood, M. W. Wardle
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Wedgewood, A. R., Wardle, M. W. (1988). Dependence of Incipient Edge Delamination Strength on Neat Resin Fracture Toughness. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Design of Laminated Composite with Controlled-Damage Concept
C. T. Sun, T. L. Norman
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Sun, C. T., Norman, T. L. (1988). Design of Laminated Composite with Controlled-Damage Concept. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Development Program for the Microbial Conversion of Phenylacetylene to Meta-Hydroxy Phenylacetylene
P. E. Swanson, R. J. Huss
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Swanson, P. E., Huss, R. J. (1988). Development Program for the Microbial Conversion of Phenylacetylene to Meta-Hydroxy Phenylacetylene. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Dicyanate Blends as Matrices for High Performance Composites
E. M. Woo, B. Fukai, J. C. Seferis
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Woo, E. M., Fukai, B., Seferis, J. C. (1988). Dicyanate Blends as Matrices for High Performance Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Economic Issues in Composites Manufacturing
R. M. Mclane
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Mclane, R. M. (1988). Economic Issues in Composites Manufacturing. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Effect of Initial Delamination on G_Ic and G_IIh Values from Glass/Epoxy Double Cantilever Beam Tests
R. H. Martin
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Martin, R. H. (1988). Effect of Initial Delamination on G_Ic and G_IIh Values from Glass/Epoxy Double Cantilever Beam Tests. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Effect of Thermal Spike on Composite Moisture Capacity
M. J. Adamson
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Adamson, M. J. (1988). Effect of Thermal Spike on Composite Moisture Capacity. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Effects of Microstructure on Failure In PEEK and Its Short-Fiber Composites
J.-N. Chu, G. -M. Wu, J. M. Schultz
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Chu, J.-N., Wu, G. -M., Schultz, J. M. (1988). Effects of Microstructure on Failure In PEEK and Its Short-Fiber Composites . In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Effects of Plasma Treatment on Performance of Composite Flywheels
J. Border
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Border, J. (1988). Effects of Plasma Treatment on Performance of Composite Flywheels. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Engineering Tomography: A Quantitative NDE Technique for Composite Materials
H. M. Stoller, J. G. Crose, W. H. Pfeifer
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Stoller, H. M., Crose, J. G., Pfeifer, W. H. (1988). Engineering Tomography: A Quantitative NDE Technique for Composite Materials. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Enhancement of Spectra Brand Polyethylene Fiber Adhesion to Epoxy Matrix
R. S. Raghava
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Raghava, R. S. (1988). Enhancement of Spectra Brand Polyethylene Fiber Adhesion to Epoxy Matrix. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Experimental Evaluation of the Prepregging Process
J. Breukers, E. M. Woo, J. C. Seferis
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Breukers, J., Woo, E. M., Seferis, J. C. (1988). Experimental Evaluation of the Prepregging Process. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Experimental Investigation of Quasi-Isotropic Graphite/Epoxy Laminate with a Reinforced Hole
J. H. Lee, S. Mall
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Lee, J. H., Mall, S. (1988). Experimental Investigation of Quasi-Isotropic Graphite/Epoxy Laminate with a Reinforced Hole. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Fabrication of Low Cost Missile Structure
C. H. Sheppard, B. A. Koetje, R. Krone
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Sheppard, C. H., Koetje, B. A., Krone, R. (1988). Fabrication of Low Cost Missile Structure. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Fracture Toughness Design in Horse Hoof Keratin
J. E. A. Berram, J. M. Gosline
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Berram, J. E. A., Gosline, J. M. (1988). Fracture Toughness Design in Horse Hoof Keratin. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Global-Local Finite Element Method for Analysis of Composites
T.-L. Hsiao, S. R. Soni
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Hsiao, T.-L., Soni, S. R. (1988). Global-Local Finite Element Method for Analysis of Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Graft Interpenetrating Polymer Networks of Poly(propylene oxide) Glycol-Based Polyurethane and Epoxy
K.-H. Hsieh, J.-L. Han
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Hsieh, K.-H., Han, J.-L. (1988). Graft Interpenetrating Polymer Networks of Poly(propylene oxide) Glycol-Based Polyurethane and Epoxy. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Hierarchical Structure of the Intervertebral Disc
J. Cassidy, A. Hilliar, E. Baer
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Cassidy, J., Hilliar, A., Baer, E. (1988). Hierarchical Structure of the Intervertebral Disc. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
History Dependent Free Edge Stresses in Composites
K. Y. Lin, I. H. Hwang, L. B. Ilcewicz
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Lin, K. Y., Hwang, I. H., Ilcewicz, L. B. (1988). History Dependent Free Edge Stresses in Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Impact Damage Characterization of Graphite/Epoxy Laminates
J. H. Gosse, P. B. Y. Mori
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Gosse, J. H., Mori, P. B. Y. (1988). Impact Damage Characterization of Graphite/Epoxy Laminates. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Impact-Induced Damage Initiation Analysis: An Experimental Study
S. P. Joshi
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Joshi, S. P. (1988). Impact-Induced Damage Initiation Analysis: An Experimental Study. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Interphase Tailoring in Graphite-Epoxy Composites
R. V. Subramanian, A. R. Sanadi, A. S. Crasto
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Subramanian, R. V., Sanadi, A. R., Crasto, A. S. (1988). Interphase Tailoring in Graphite-Epoxy Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Materials with Negative Poisson's Ratios: Dependence of Properties on Structure
R. S. Lakes, J. B. Park, E. A. Fariis
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Lakes, R. S., Park, J. B., Fariis, E. A. (1988). Materials with Negative Poisson's Ratios: Dependence of Properties on Structure. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Measurement of Fiber Misalignment in Aligned Fiber Composites and the Influence of Lamination on Misalignment Distributions
S. W. Yurgartis
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Yurgartis, S. W. (1988). Measurement of Fiber Misalignment in Aligned Fiber Composites and the Influence of Lamination on Misalignment Distributions. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Mechanical Characterization of a Thick Composite Laminate
R. Kim
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Kim, R. (1988). Mechanical Characterization of a Thick Composite Laminate. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Microwave and Thermal Heating of Polymer Composites Containing Thermally Conductive or Non-Conductive Reinforcement
J. Jow, M. C. Hawley, J. D. Delong
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Jow, J., Hawley, M. C., Delong, J. D. (1988). Microwave and Thermal Heating of Polymer Composites Containing Thermally Conductive or Non-Conductive Reinforcement. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Modeling Creep Behavior of Fiber Composites
J. L. Chen, C. T. Sun
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Chen, J. L., Sun, C. T. (1988). Modeling Creep Behavior of Fiber Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Modeling of Heat Transfer During the Processing of Thermoplastic Composites
T. E. Saliba, D. P. Anderson
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Saliba, T. E., Anderson, D. P. (1988). Modeling of Heat Transfer During the Processing of Thermoplastic Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Modelling of Elastic Properties of 3D Textile Structural Composites
T. J. Whitney, T.-W. Chou
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Whitney, T. J., Chou, T.-W. (1988). Modelling of Elastic Properties of 3D Textile Structural Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Monitoring Cure of Composite Resins Using Frequency Dependent Electromagnetic Sensing Techniques
D. E. Kranbuehl, M. Hoff, D. A. Eichinger, A. C. Loos, W. T. Freeman, Jr.
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Kranbuehl, D. E., Hoff, M., Eichinger, D. A., Loos, A. C., Freeman, W. T., Jr. (1988). Monitoring Cure of Composite Resins Using Frequency Dependent Electromagnetic Sensing Techniques. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Rogers, C. A. (1988). Novel Design Concepts Utilizing Shape Memory Alloy Reinforced Composites. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Parametric Studies of Impact Testing in Laminated and Woven Architectures
L. E. Taske, A. P. Majidi
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Taske, L. E., Majidi, A. P. (1988). Parametric Studies of Impact Testing in Laminated and Woven Architectures. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Predicted and Observed Effects of Stacking Sequence and Delamination Size on Instability-Related Delamination Growth
J. D. Whitcomb
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Whitcomb, J. D. (1988). Predicted and Observed Effects of Stacking Sequence and Delamination Size on Instability-Related Delamination Growth. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Pultrusion Impregnated Thermoplastic Tape
M. F. Custer, K. E. Vicknair
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Custer, M. F., Vicknair, K. E. (1988). Pultrusion Impregnated Thermoplastic Tape. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Rheological and Chemical Characterization of a Glass Reinforced Polyester Prepreg Material
L. A. Peters
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Peters, L. A. (1988). Rheological and Chemical Characterization of a Glass Reinforced Polyester Prepreg Material. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
Rubber-Toughened Polycarbonate
C. K. Riew, R. E. Morris, M. E. Woods
1988 – In Proceedings of the 3rd ASC Technical Conference, Seattle, WA
Copied!
Riew, C. K., Morris, R. E., Woods, M. E. (1988). Rubber-Toughened Polycarbonate. In: Proceedings of the 3rd ASC Technical Conference. Seattle, WA.
